Fiber optic installation and splicing in Saudi Arabia

A fiber link that passes its first test can still fail two years later if the splicing or route planning was rushed. Arab Spec designs and installs fiber optic links across Saudi Arabia, between floors, buildings, and sites, and engineers each route for the conditions it will run in, including conduit fill, bend radius, and environmental exposure. Every installation is spliced and terminated by experienced technicians and backed by OTDR test results, so you get a link built to last, not just to pass on day one.

What's included

  • Single-mode and multi-mode fiber route design and installation
  • Fusion splicing and termination to industry-standard loss budgets
  • OTDR and power meter testing, with results handed over
  • Inter-building and campus fiber backbones
  • Indoor, outdoor, and armoured fiber cabling
  • Fiber patch panels, enclosures, and splice closures
  • Fault finding and emergency fiber repairs
  • As-built route records and documentation
8+
YEARS IN BUSINESS
200+
CUSTOMERS SERVED
100+
PARTNER CHANNELS
300+
PROJECTS DELIVERED

Fiber links engineered to last.

From a single link between two server rooms to a campus backbone, we design, install, splice, test, and document fiber that keeps working for years.

Fiber design

The right fiber and route for the job.

  • Single-mode or multi-mode selection
  • Route planning, conduit fill, and bend radius
  • Loss budget calculations
  • Indoor, outdoor, and armoured cable selection

Installation

Cable laid properly, protected for its environment.

  • Backbones between floors and buildings
  • Duct, tray, and conduit installation
  • Outdoor and underground routes
  • Fiber to the desk where needed

Splicing and termination

Low-loss joints done right.

  • Fusion splicing
  • Pigtail and connector termination
  • Patch panels and enclosures
  • Splice closures for outdoor joints

Testing and certification

Proof the link performs.

  • OTDR testing of every fiber
  • Power meter and light source testing
  • Results against the loss budget
  • Test reports handed over

Maintenance and repair

Fast help when a link goes down.

  • Fault location with OTDR
  • Emergency splicing and repairs
  • Damaged cable replacement
  • Re-termination and connector cleaning

Documentation

Know exactly where your fiber runs.

  • As-built route records
  • Splice and port records
  • Labelling of every fiber and panel

Fiber is part of the network: see structured cabling for copper cabling and racks, and networking solutions for the switches and equipment on each end.

Where we install fiber.

Fiber runs in very different conditions, from a clean server room to an outdoor duct in the summer heat. We choose the cable and route for each one.

High-capacity, reliable links between buildings are also the base for secure, segmented networks and for connecting cameras, access control, and building systems across a site.

Multi-building campuses

Backbones linking offices, warehouses, and gatehouses.

Server rooms and data centers

High-speed links between racks and rooms.

Industrial and project sites

Armoured and outdoor fiber for harsh conditions.

Hospitals and schools

Backbones across large, busy buildings.

Office towers

Riser links between floors and to the main server room.

CCTV and security networks

Long camera runs beyond the reach of copper.

How we deliver a fiber project.

The same six steps for one link or a full campus backbone.

Step
What we do
What you get
01Survey
Walk the route, check ducts, risers, and rooms, and confirm distances.
Route survey
02Design
Choose the fiber type, cable, and route, and calculate the loss budget.
Fiber design and bill of materials
03Install
Lay and protect the cable along the planned route.
Fiber installed
04Splice and terminate
Fusion splice and terminate into panels and enclosures.
Spliced, terminated fiber
05Test
Test every fiber with OTDR and power meter against the loss budget.
OTDR and power test reports
06Document and hand over
Label everything and hand over route and splice records.
Documentation pack

What you receive.

Fiber links you can rely on, with the test results to prove it.

Deliverable
What it gives you
Route survey
The planned route, distances, and access points.
Loss budget
The expected loss for each link, calculated before installation.
OTDR test reports
Traces for every fiber, showing splices and connectors.
Power meter results
Measured loss for every link against the budget.
As-built records
Where the fiber runs, and every splice and port.
Labelling
Every fiber, panel, and enclosure clearly labelled.

Ways to work with us.

One link, a full backbone, or a repair. Tell us about the site and we will send a tailored quote.

 

Single link

  • Between two rooms or buildings
  • Splicing and termination
  • OTDR tested
  • Documented
Most requested

Campus backbone

  • Route survey and design
  • Multi-building installation
  • Splicing and testing
  • Full documentation
 

Repair and maintenance

  • Fault location with OTDR
  • Emergency splicing
  • Re-termination
  • Testing after repair

Why Arab Spec for fiber optics.

Arab Spec has delivered IT projects for businesses across Saudi Arabia since 2018, for more than 200 customers and over 300 projects. Our technicians have spliced and tested fiber for offices, campuses, data centers, and industrial sites.

We work with fiber and cabling brands such as Corning. See all our technology partners.

Experienced splicing technicians

A professional team with years of fiber installation and splicing experience.

Engineered, not just installed

Routes planned for bend radius, conduit fill, and the environment.

Every fiber tested

OTDR and power meter results against the loss budget.

Fast repairs

Faults located and repaired quickly to get you back online.

Documented properly

Route, splice, and port records you can rely on.

One team for the whole network

Fiber, copper, switching, and Wi-Fi from one accountable team.

Questions we get asked.

What is the difference between single-mode and multi-mode fiber?
Single-mode fiber carries signals over long distances, such as between buildings or sites. Multi-mode fiber suits shorter links, such as inside a building or server room. We choose the right type for each link.
What is fusion splicing?
A way of joining two fibers by melting them together with a precise machine. It gives a strong, low-loss joint that lasts for years.
What is OTDR testing?
An optical time-domain reflectometer sends light down the fiber and shows the loss at every splice and connector, and where any fault is. We test every fiber and hand over the results.
Can you connect our buildings with fiber?
Yes. We design and install fiber backbones between buildings, through ducts or outdoor routes, with armoured cable where needed.
Can you repair a damaged fiber cable?
Yes. We locate the fault with an OTDR, splice or replace the damaged section, and retest the link.
How long does fiber last?
Properly installed and protected fiber can last for decades. Most failures come from poor installation, tight bends, or damage, which is why we plan routes carefully.
Do you provide documentation?
Yes. You receive route records, splice and port records, labels on every fiber and panel, and the test reports.
How much does fiber installation cost?
The price depends on the distance, the route, the number of fibers, and the type of cable. After a route survey we send you a quote in Saudi riyals.

Start a project

Tell us a little about what you need, and we'll get back to you shortly.