Structured cabling installation in Saudi Arabia

Cabling that is not documented becomes a liability the first time something breaks and nobody can trace which run goes where. Arab Spec designs and installs structured cabling for new fit-outs, office moves, and retrofits across Saudi Arabia: Cat6 and Cat6A copper, fiber backbones, racks, and patching, all labelled, tested, and handed over with as-built documentation, so your team, or ours, can find and fix a fault in minutes, not hours.

What's included

  • Cat6 and Cat6A copper cabling for data, phones, cameras, and Wi-Fi
  • Fiber backbones between floors, buildings, and server rooms
  • Cabinets, racks, patch panels, and cable management
  • Labelling of every cable, port, and panel
  • Testing and certification of every link, with reports
  • As-built drawings and documentation on handover
  • Retrofit and expansion work that does not disrupt live systems
  • Cabling for CCTV, access control, and building systems
8+
YEARS IN BUSINESS
200+
CUSTOMERS SERVED
100+
PARTNER CHANNELS
300+
PROJECTS DELIVERED

Cabling that is built properly and documented.

The physical layer every network depends on, designed, installed, tested, and documented by one team.

Copper data cabling

Reliable cabling to every desk, ceiling, and camera.

  • Cat6 and Cat6A cabling for data and voice
  • Cabling for Wi-Fi access points, IP phones, and cameras
  • PoE-ready cabling for powered devices
  • Floor, wall, and ceiling outlets

Fiber backbones

Fast links between floors and buildings.

  • Single-mode and multi-mode fiber backbones
  • Links between floors, buildings, and server rooms
  • Fusion splicing and termination
  • See fiber optic solutions

Racks and server rooms

Tidy, organised, and easy to work in.

  • Cabinets and open racks
  • Patch panels and cable management
  • Rack layout and power planning
  • Server room clean-ups and re-patching

Containment

Cable routes built to last.

  • Cable trays, ladders, and trunking
  • Conduit and underfloor routes
  • Fire-stopping where cables pass through walls
  • Separation from power cabling

Testing and documentation

Proof that every link works.

  • Every link tested and certified
  • Test reports handed over
  • Labelling of every cable, port, and panel
  • As-built drawings and port schedules

Moves, adds, and changes

Cabling that grows with your business.

  • Office moves and fit-outs
  • New points added to live networks
  • Old and dead cabling removed
  • Emergency repairs

Cabling is the base of your network: see networking solutions for switching and Wi-Fi, and fiber optic solutions for longer links.

Where we install cabling.

Every building has different routes, ceilings, and rules. We plan the cabling around your space, your devices, and how you will grow.

Good cabling also supports security and compliance: separate, labelled runs for cameras, access control, and building systems make networks easier to segment and audit.

New offices and fit-outs

Cabling designed with your interior and furniture plans.

Office moves and expansions

New floors and points added without disrupting work.

Server rooms and data centers

Neat, high-density cabling and racks.

Warehouses and factories

Long runs, high ceilings, and outdoor cabling.

Retail, clinics, and schools

Cabling for point-of-sale, cameras, phones, and Wi-Fi.

Multi-building sites

Fiber backbones linking buildings on one site.

How we install your cabling.

The same six steps for a small office or a full building, so you always know what happens next and what you receive.

Step
What we do
What you get
01Survey
Visit the site, check routes, ceilings, and rooms, and agree where every point goes.
Site survey and point plan
02Design
Plan cable routes, containment, racks, and the labelling scheme.
Cabling design and bill of materials
03Install
Install containment, pull and terminate cables, and build racks.
Cabling installed to the design
04Label
Label every cable, port, and panel to the agreed scheme.
Fully labelled installation
05Test
Test and certify every link, and fix anything that fails.
Test reports for every link
06Hand over
Provide as-built drawings, port schedules, and test results.
Documentation pack

What you receive.

Cabling you can trust, with the records to prove it.

Deliverable
What it gives you
Site survey and point plan
Where every outlet, rack, and route goes.
Bill of materials
Every cable, panel, rack, and accessory, with quantities.
Test reports
Results for every link, showing it meets its category.
Labelling scheme
A clear, consistent label on every cable and port.
As-built drawings
Drawings that match exactly what was installed.
Port schedule
Which outlet connects to which patch panel port.

Ways to work with us.

A few new points, a full office, or a whole building. Tell us about the site and we will send a tailored quote.

 

New points

  • Points added to your network
  • Cat6 or Cat6A
  • Tested and labelled
  • Quick turnaround
Most requested

Office or building project

  • Survey and design
  • Copper and fiber cabling
  • Racks and patching
  • Testing and documentation
 

Server room clean-up

  • Re-patching and cable management
  • Rack reorganisation
  • Labelling
  • Updated documentation

Why Arab Spec for structured cabling.

Arab Spec has delivered IT projects for businesses across Saudi Arabia since 2018, for more than 200 customers and over 300 projects. Our cabling teams have installed networks in offices, warehouses, clinics, schools, and server rooms.

We work with cabling brands such as Corning and Belden. See all our technology partners.

Experienced installers

A professional team with years of experience in copper and fiber cabling.

Neat, professional work

Tidy racks, proper containment, and cabling built to last.

Every link tested

Tested and certified, with reports handed over.

Documented properly

Labels, drawings, and port schedules so faults are found fast.

One team from cable to network

The same team installs the switches, Wi-Fi, and security on top.

Minimal disruption

Work planned around your business, after hours if needed.

Questions we get asked.

What is structured cabling?
An organised cabling system with standard cables, patch panels, and labelled routes that carries data, voice, cameras, and Wi-Fi across a building. It makes the network reliable and easy to change and troubleshoot.
Should we choose Cat6 or Cat6A?
Cat6 suits most offices and supports speeds of up to 10 Gbps over short distances. Cat6A supports 10 Gbps over the full 100 metres and suits new buildings, Wi-Fi 6 and 7 access points, and server rooms. We recommend the right one for your site.
Do you test and certify the cabling?
Yes. We test every link after installation, fix anything that fails, and hand over the test results with the documentation.
Can you add points to our existing network?
Yes. We add new points to live networks, test them, and label them to match your existing scheme, without disrupting your work.
Can you tidy up our server room?
Yes. We re-patch, organise cable management, label everything, and update the documentation so your server room is easy to work in.
Do you install cabling for CCTV and access control?
Yes. We cable cameras, access control, intercoms, and building systems, on their own labelled runs so they are easy to manage.
How long does a cabling project take?
It depends on the number of points and the building. Small jobs take days; full buildings take longer. We agree the schedule after the site survey.
How much does structured cabling cost?
The price depends on the number of points, the cable type, the routes, and the racks needed. After a site survey we send you a quote in Saudi riyals.

Start a project

Tell us a little about what you need, and we'll get back to you shortly.