SACS-210 consultation and audit readiness for Aramco and SABIC suppliers
We take you from the SACS-210 requirements that apply to you to a certification-ready posture. We start by confirming your classification, then assess your current controls, prioritise the gaps, support remediation, organise your evidence, and prepare you for the formal Cybersecurity Compliance Certificate (CCC) assessment by an Aramco-authorized audit firm. Arab Spec supports you through the whole process, and the authorized auditor issues the certificate.
What's included
- Third-party classification and applicability review, so you only work on the requirements that apply
- Control applicability and compliance matrix for every applicable SACS-210 requirement
- Detailed gap assessment and a prioritised remediation roadmap
- Policy, procedure, and technical remediation support within the agreed scope
- Evidence request, evidence register, and a compliance evidence pack for the audit
- Pre-audit readiness assessment and certification readiness support
- Auditor handling and coordination with the authorized audit firm until your CCC is issued
- Renewal planning before your certificate expires
What SACS-210 asks of you.
SACS-210 is the Third-Party Cybersecurity Standard issued by Saudi Aramco in February 2026. It sets the minimum requirements to protect the confidentiality, integrity, and availability of the data and information systems that third parties handle, access, or connect to. The same standard and Cybersecurity Compliance Certificate (CCC) process apply to SABIC suppliers.
The standard has two layers. The General Requirements, TPC1.1 to TPC1.33, apply to every third party. The Specific Requirements, TPC2.1 to TPC2.116, apply according to your classification and the services you provide.
SACS 210, also written SACS-210, is the current version of Aramco's third-party cybersecurity standard. Older documents and contracts still refer to the earlier SACS-002. Whether your company is an Aramco vendor, supplier, or contractor, if the standard applies to you, you need the Aramco CCC certificate to keep working with Aramco and SABIC. As SACS-210 consultants, we help you get that CCC certification and keep it current.
The 33 general requirements by function
Your classification adds further controls on top of these 33.
If you do any of this, it applies to you.
- Processes, transmits, or stores corporate information and personal data
- Has access to a corporate computer or server
- Supplies off-the-shelf or customised software to the corporation
- Has a connection to the corporate network
- Provides consultancy for high-sensitivity strategic projects at national level
Suppliers must also make sure their own subcontractors meet the applicable requirements.
Third-party classifications
General Requirement
The baseline for every third party, covering governance, access, passwords, MFA, data security, training, and the CCC.
Network Connectivity
Your infrastructure connects to their network through a leased line or VPN.
Outsourced and Managed Services
You run or support infrastructure they own, such as data centres, co-location, or backup centres.
Critical Data Processor
You develop, access, or process their confidential data.
Software Services
You develop or host customised software, an application, or a website for them.
Cloud Computing
You provide IaaS, PaaS, or SaaS services.
Operational Technology
You design, supply, integrate, or maintain OT systems such as DCS, SCADA, and PLCs.
We confirm applicability first.
SACS-210 does not apply the same specific requirements to every third party. Your control baseline depends on your classification, which is set by your access, services, technology, facilities, and data relationship with Aramco. Where more than one classification applies, the requirements from each are combined.
So we establish your classification before any assessment starts. The first phase produces two documents that define your baseline: a Third-Party Classification and Applicability Review, and a Control Applicability and Compliance Matrix that maps every applicable requirement to its current status, required evidence, gaps, remediation actions, owner, and validation status.
How many controls apply to you.
Every third party must meet all 33 general requirements. Each classification then adds its own specific requirements from TPC-2.1 to TPC-2.116. If more than one classification applies to you, you meet the combined set. Of the 116 specific requirements, 46 apply to all six classifications.
Counted from the applicability table in the February 2026 standard. A General Requirement third party meets the 33 general requirements only.
The 116 specific requirements by function
Examples of specific requirements
What the auditor will look for.
Governance and assets
KSA law compliance, core policies, onboarding and offboarding, a valid CCC, and an asset inventory.
Access
MFA for remote, cloud, email, and privileged access, plus annual access reviews.
Data
Strong encryption, controlled external media, and secure return and deletion of their data.
SPF, DKIM, and DMARC, anti-spam, attachment checks, a private email domain, and blocked Office macros.
Platform
Firewalls on every endpoint, a web application firewall, up-to-date antivirus, and tested patches.
Detect and respond
Security event logging, time sync, protected logs, and incidents reported within 24 hours.
SACS-210 checklist: all 33 general requirements.
These apply to every third party, whatever your classification. Each one is summarised in plain language below. The wording in the standard always takes precedence.
Govern (7)
Identify (1)
Protect (22)
Detect (1)
Respond (2)
Our six-phase SACS-210 readiness process.
We help you from the first assessment through to the audit and after it. We do not just document security for the audit, we help keep you secure all year round.
* Indicative Arab Spec effort. Actual remediation time and overall completion depend on your scope, technical complexity, your dependencies, and audit scheduling.
The Cybersecurity Compliance Certificate is issued by audit firms authorised by Aramco. Arab Spec prepares your company and supports the process with them, and the certification decision stays with the authorized audit firm.
What you receive.
Defined outputs that support your assessment, remediation, evidence, and audit readiness.
Who does what.
Clear accountability across the engagement, so nobody is unsure who is responsible for what.
Arab Spec
Assessment, gap analysis, remediation support, evidence preparation, readiness validation, and audit coordination where included.
You
Information and access, subject-matter experts, approvals, technical implementation of agreed changes, and business decisions.
Authorized audit firm
Independent assessment, evidence evaluation, audit findings, and the certification decision.
Accountability boundary. Arab Spec supports assessment, remediation, evidence preparation, and readiness within the agreed scope. You remain responsible for providing the required information, access, and approvals, and for implementing assigned changes. The authorized audit firm remains independently responsible for the formal assessment and the certification decision.
If a requirement cannot be met
Where a SACS-210 requirement cannot feasibly be implemented, a policy waiver can be requested through the applicable process. We help by documenting the implementation constraint, the risk, the proposed treatment, and the supporting information the process needs. A waiver is subject to approval and does not automatically remove the underlying requirement.
Choose the plan that fits.
Pick the plan you would like to proceed with and we will confirm the official pricing once you select.
Analyse
- Gap analysis against all 33 controls
Implement
- Gap analysis
- Policy documentation
- Implementation of policies and technical controls
- Evidence collection
- Auditor handling
Complete
- Gap analysis
- Policy documentation
- Implementation of policies and technical controls
- Evidence collection
- Auditor handling
- Auditor fee handling
* Final amounts may vary depending on the number of end-user devices and employees. All amounts are exclusive of VAT.
Why Arab Spec for SACS-210.
This is not a checklist exercise. It is a controlled path from the requirements that apply to you to remediation, evidence, readiness, and formal assessment support.
Our head office is in Jeddah, and our Al Khobar branch office is in Dhahran, where Saudi Aramco's headquarters is located. We support suppliers across Saudi Arabia.
Applicability first
We confirm your classification before the specific requirements are finalised, so you only work on what applies to you.
Control traceability
Every applicable requirement is linked to its status, evidence, gaps, remediation actions, owner, and validation.
Practical implementation
Findings become actionable fixes and technical guidance within the agreed scope.
Evidence discipline
Implementation status and supporting evidence are tracked separately, which strengthens your assessment readiness.
Integrated IT capability
Cybersecurity, infrastructure, networking, and IT support under one team, so related technical work is coordinated.
Long-term support
Our service model supports your technology operations beyond the initial assessment and readiness work.
Clear audit roles
We support readiness and audit coordination. The authorized audit firm keeps independent responsibility for assessment and certification.
Related services.
Questions we get asked.
What is SACS-210?
Who needs to comply with SACS-210?
What is the Cybersecurity Compliance Certificate (CCC)?
How do we get the Aramco CCC certificate?
How many SACS-210 requirements are there?
Where can I download the SACS-210 standard PDF?
How many SACS-210 controls apply to my classification?
What are the SACS-210 password and MFA requirements?
What must SACS-210 audit logs capture?
What does SACS-210 require from Operational Technology (OT) suppliers?
How do we know which classification applies to us?
What does a SACS-210 gap assessment involve?
Does Arab Spec issue the certificate?
Does this also apply to SABIC suppliers?
How long does it take?
How much does it cost?
What if we cannot meet a requirement?
What must we do if there is a security incident?
What do we need to provide?
What happens when the certificate expires?
Where is Arab Spec based?
Download the official SACS-210 standard.
The Third-Party Cybersecurity Standard SACS-210 (February 2026) is published by Saudi Aramco and classified as Public. It sets out the purpose and scope, the seven third-party classifications, the 33 general and 116 specific requirements, how each control applies to IaaS, PaaS, and SaaS, and appendices on incident response, incident reports, audit logging, and OT certifications.
Download the SACS-210 PDF